 |
300R 5mm PTC Positive Temperature Coefficient Lamp starting PTC Type Thermistor
Product Details:
| Place of Origin: | Dongguan,Guangdong,China |
| Brand Name: | AMPFORT |
| Certification: | RoHS |
| Model Number: | SPMZC-729565 |
Payment & Shipping Terms:
| Minimum Order Quantity: | 1000 Pieces |
|---|---|
| Price: | TBA |
| Packaging Details: | Bulk |
| Delivery Time: | 2 Weeks |
| Payment Terms: | T/T,Paypal |
| Supply Ability: | 1,000,000 Pieces Per Month |
|
Detail Information |
|||
| Product Name: | SPMZC Intelligent PTCR PTC Thermistor | Dmax: | 8.0mm |
|---|---|---|---|
| Lead Spacing: | 5mm | Rated Resistance: | 300Ω±50% |
| Reference Temperature: | 105±7℃ | Varistor Voltage: | 290 ±10%V |
| High Light: | 300R ptc positive temperature coefficient,5mm ptc positive temperature coefficient,Lamp starting ptc type thermistor |
||
Product Description
SPMZC Intelligent PTCR PTC Thermistor 300R 105C 290V For Energy Saving Lamp Starting
I Description Of The SPMZC Intelligent PTCR PTC Thermistor
Sensors and components need keep improving with the demands of markets for higher and higher quality products. Our company introduced patent producing technology of intelligent PTCR to produce preheating-starting components of electronic ballasts and electronic energy-saving lamps ,which enormously increase the number of switching cycles and life of fluorescent lamps .At the same time ,they overcome temperature warmuping and energy wasting of normal PTCR after they preheated and started electronic ballasts or electronic energy-saving lamps. They enhance luminous flux ,lumen numbers and luminescence efficiency,so they are called another creative revolution of green illuminance electricities.
II Features Of The SPMZC Intelligent PTCR PTC Thermistor
1. PTC and varistor composite;
2. No heat and no power consumption after the filament is warmed up;
3. Small size for easy installation;
4. Operating temperature range: -40 -- +125℃(V=Vmax);
III Dimensional Drawing Of The SPMZC Intelligent PTCR PTC Thermistor
|
Dimension: (mm)
|
Marking | ||||||||
| □ No marking | ■ SP729565 | ||||||||
| Coating | |||||||||
|
Material □Epoxy resin ■Silicon resin □Phenolic resin □Non-coating |
Color □Red □Yellow ■Green □Black |
||||||||
| Terminal | |||||||||
|
Material □Tinned Cu wire ■CP wire □Tinned phosphor □Leadless |
Shape □Side kink □Outer kink ■Inner kink |
||||||||
| Dmax | F±1 | hmax | Lmin | Φd±0.05 | Hmax | ||||
| 8.0 | 5.0 | 16.5 | 20.0 | 0.60 | 6.0 | ||||
| Electrical performance | |||||||||
| Item | Technical requirement | Test condition and method | |||||||
|
Rated resistance Rr |
300Ω±50% |
Temperature:25 ± 2 ℃, Testing voltage≤1.5VDC; Metering accuracy:± 0.5Ω |
|||||||
|
Reference temperature Tref |
105±7℃ | The temperature corresponding to twice as rated current. Thermal conductivity of static dielectric is silicone oil or air, temperature precision ±0.5℃, temperature maintaining time ≥15min; temperature upgrade ≤30℃/h | |||||||
|
Varistor Voltage Vrms |
290 ±10%V
|
Ta: 25±2℃ Testing Current : 1.0mA
|
|||||||
IV Application environment Of The SPMZC Intelligent PTCR PTC Thermistor
Ambient temperature: -10 -- +60℃
Relative humidity: ≤95%RH(+40℃)
Barometric pressure: 86 -- 106Kpa
Vibration frequency:10 -- 50Hz
Accelerated velocity:98m/s2
Storage temperature: -40 -- +125℃
V Reliability test Of The SPMZC Intelligent PTCR PTC Thermistor
| Apperance | No visible damage | Visual test |
| Solderablity | At least 95% of terminal electrode is covered by new solder |
Refer to IEC68-2-20(GB2423.28) Ta Dip each lead into 230±5℃ solder for 3~5sec to the 5mm above body |
| Vibration | No marked defect. | The capacitor shall firmly be soldered to the supporting terminal and vibration, which is 10 to 55Hz in the vibration frequency range, 0.75mm in total amplitude, and about 10Hz to 55Hz and back to 10Hz. According to 4.16 in GB10193-88. |
| Solder ability |
The terminals shall be uniformly tinned, and its area ≥95% |
Dipping the PTCR’s terminals to a depth of 2-0.5mm in a soldering bath of 235±5℃ for 5±0.5S. |
| Resistance to soldering heat |
ΔV1mA/ V1mA≤±5% ΔR/Rn≤20% No outstanding damage |
After each lead shall be dipped into a solder bath having a temperature 260±5℃. To a point 2.0 to 2.5mm from the body of the unit. Using shielding. Board(t=1.5mm).be held there for specified time (5 series:5±1s and others:10±1s) and then be stored at room temperature and humidity for 1 to 2 hours. Refer to IEC68-2-20(GB2423.28) Tb |
| Flame-retardant | Refer to IEC695-2-2 |
Notes:
1. The production with a * is also used in electronic ballasts such as T5, T8.
2. The data is only for reference, you can forward your detailed requirements if possible.
3. We have obtained the SGS test report about the content of Lead,Cadmium,Mercury, Hexavalent Chromium,PBBs,PBDEs in the SPMZC series PTCR.