178.7017.0001 Black 2 Pin Mini Blade Fuse Holder 287 PCB In Line Fuse Holders
|Place of Origin:||Dongguan,Guangdong,China|
Payment & Shipping Terms:
|Minimum Order Quantity:||1000 Pieces|
|Delivery Time:||7-10 Workdays|
|Payment Terms:||T/T,Paypal, Western Union|
|Supply Ability:||10,000,000 Pieces Per Month|
|Name:||287 Automotive Blade Car Fuse Holder||Colour:||Black|
|Max Contact Temperature:||130°C||Soldering Contacts:||2 Pins|
|Flammability Rating:||UL94V-0||Mounting Type:||Through Hole|
|Fuse Size:||19.1mm X 5.1mm||For Use With/Related Products:||ATC, ATO|
|Fuse Type:||Blade||Fuseholder Type:||Holder|
|Orientation:||Right Angle||Contact Finish:||Tin|
178.7017.0001 mini blade fuse holder,
Black 2 pin mini blade fuse holder,
287 PCB in line fuse holders
178.7017.0001 Cross PCB Mount Horizontal 287 Automotive Blade Car Fuse Holder
Product Overview Of The 287 Automotive Blade Car Fuse Holder
The 178.7017.0001 is a 80V cartridge FKH-type Fuse Holder with thermoplastic housing, leaf spring connector systems, tinned copper alloy solder terminals and 90° connection bended solderable tin plated contacts. This fuse holder is used for ATO style blade fuse and FKS size fuse-links.Fuse holders for automotive style fuses including ZCASE, CF8, MINI, ATO, MAXI, MIDI, MEGA, JCASE and Universal Glass Fuses. Fuse holders are available for In-Line, Bolt-Down, Panel Mount and PCB applications.
* Black colour
* Soldering contacts (2-pins)
* 130°C Maximum contact temperature
* UL94V-0 Flammability rating
Features Of The 287 Automotive Blade Car Fuse Holder
• Vertical fuse entry
• Through-hole mount styles
• Surface-mount styles, available on tape-and-reel
• Fully insulated clip
• All holders have a minimum current rating: 20 amp at 500 VAC
• Fuse reference: Bussmann low-profile ATM or equivalent
• Clips & holders available for Mini, Standard, Low Profile & Maxi Auto Blade fuses
• Horizontal and vertical fuse clips and holder options
• Holds fuse securely, even after multiple insertions
• THM components maintain position during wave soldering
• SMT components available on tape and reel for automated assembly
Size Of The 287 Automotive Blade Car Fuse Holder (mm)
Specification Of The 287 Automotive Blade Car Fuse Holder
|Product Attribute||Attribute Value|
|Through Hole, Horizontal|
|Product Type:||Fuse Holders|
In order to select the proper protective device, the following parameters and criteria need to be considered:
1. What is the normal operating current of the circuit?
2. What is the operating voltage?
3. Is the circuit AC or DC?
4. What is the operating ambient temperature?
5. What is the available short-circuit current?
6. What is the maximum allowable I²t?
7. Are there in-rush currents available?
8. Is the protective device being used for short-circuit protection, over-load protection, or both?
9. What are the physical size limitations?
10. Is the PCB surface mount or thru-hole?
11. Does the fuse need to be "field-replaceable"?
12. Is resettability an issue?
13. What safety agency approvals are needed?
14. How will I mount the device?
15. What are the cost considerations?
How will the fuse be mounted?
One of the most careful considerations that need to be made is the mounting of the fuse in the circuit. There are several options at hand:
A. Direct Solder - In this method, the fuse is directly soldered into or onto the printed circuit board (PCB). The drawback to this design is the lack of field replaceable parts as discussed in great detail in section 11 but cost can be significantly reduced with this mounting method.
B. Fuse Clips - Fuse clips are relatively inexpensive and allow for field replaceability. Fuseclips are typically mounted on a PCB so any attempt at replacing the fuse will require opening of the piece of equipment by the end-user. Additionally, removing a fuse from a PCB without disconnecting the power source could lead to an electrical shock when touching the fuse. Fuse clips are available for all "tube" fuses as well as microfuses. Typically fuseclips are limited to 15A of normal current. Fuse clips are generally not listed or recognized by any safety agencies.
C. Panel Mounted Fuseholders - Panel mounted fuseholders allow for easy access for the end-user to replace the fuse in the field. The panel mount fuseholder is shock-safe meaning that the fuse is removed safely when the cap of the fuseholder is removed preventing the possibility of electrical shocks. Fuseholders are typically tested and approved by safety agencies such as UL and CSA. Fuseholders are typically available up to 30A.
D. Fuse Blocks - Fuse blocks are like fuse clips however they do not need to be mounted on the PCB. Fuses mounted in fuse blocks are typically only accessible by opening the piece of equipment which could lead to electrical shocks if the equipment is not disconnected from the power source. Fuse blocks are one of the few methods to mount fuses of large amperage.
E. Inline Fuse Holders - Inline fuse holders are typically used as a part of a wire harness assembly or where no surface is available to secure another type of fuse mount. Inline fuse holders are generally available up to 100