200A 32V Bolt On ANM-B MEGA Fuse Holder For Automobile Wiring Harness
|Place of Origin:||DONGGUAN,GUANGDONG,CHINA|
Payment & Shipping Terms:
|Minimum Order Quantity:||100PCS|
|Packaging Details:||100pcs per bag, 5000pcs per box|
|Delivery Time:||7 Workdays|
|Payment Terms:||T/T, Western Union|
|Supply Ability:||2000PCS PER WEEK|
|Name:||Mega Fuse Holder ANM-B||Length:||126 Mm|
|Width:||37 Mm||Height:||43.5 Mm|
|Hole Distance:||94 Mm||Cover:||With|
|Rated Voltage:||32V Dc||Current Rating:||40A 50A 60A 70A 80A 100A 150A 200A|
|Package:||100pcs Per Carton||Application:||Battery Protection Circuit|
200A 32V MEGA Fuse Holder,
Bolt On MEGA Fuse Block,
ANM-B Automobile Fuse Holder
200A 32V ANM Bolt-On Single Mega Fuse Holder ANM-B For Automobile Wiring Harness
Fuse Blocks, Fuse Holders and Fuse Accessories
Enable easy fuse installation and replacement with our comprehensive line of fuse blocks,fuse holders, and fuse accessories for automotive, electronic, and industrial applications.
|1||PB- ANM||BASE||2||PA+GF 94-V0||Black|
|2||BL-ANM||Bolt||1||carbon steel||Ni plated|
|3||NT-ANM||Nut||4||carbon steel||Ni plated|
|4||SP- ANM||Spring||2||carbon steel||Ni plated|
|5||DQ-ANM||spacer||4||carbon steel||Ni plated|
|7||7 | PL-ANM-1||Plug||1||PVC||Black|
* Automobile wiring harness
* New energy vehicle control box
* DC power supplyequipment
* Power supply
* Communication equipment
* Battery protection circuit
* BMS System
|Product Name||MEGA Fuse Holder ANM Bolt-on Fuse Block|
|Hole Distance||94 mm|
|Rated Voltage||32V dc|
|Rated Current||40A 50A 60A 70A 80A 100A 150A 200A|
|Package||100pcs per carton|
1) Insulating Body: Nylon With Glass Fiber / PC
2) Contact terminal material: Brass
3) Rated current: 200A MAX
4) Two fuses can be installed for ANM-C model
5) Applicable: For 40A~200A ANM/MEGA Fuses
Selection of the Fuse and Holder Solution
The first step is to answer the following questions:
Will the fuse need to accessible for replacement?
How often will the fuse need to be replaced?
Should the end customer of the appliance have access to change the fuse?
Should the fuse only be accessible from outside the appliance?
How much is available to spend on safety and reliability?
Rerating (Derating) a Fuseholder
For 25°C ambient temperatures, it is recommended that fuseholders be operated at no more than 60% of the nominal current rating established using the controlled test conditions specified by Underwriters Laboratories. The primary objective of these UL test conditions is to specify common test standards necessary for the continued control of manufactured items intended for protection against fire, etc. A copper dummy fuse is inserted in the fuseholder by Underwriters Laboratories, and then the current is increased until a certain temperature rise occurs. The majority of the heat is produced by the contact resistance of the fuseholder clips. This value of current is considered to be the rated current of the fuseholder, expressed as 100% of rating.
Some of the more common, everyday applications may differ from these UL test conditions as follows: fully enclosed fuseholders, high contact resistance,air movement, transient spikes, and changes in connecting cable size (diameter and length). Even small variations from the controlled test conditions can greatly affect the ratings of the fuseholder. For this reason, it is recommended that fuseholders be derated by 40% (operated at no more than 60% of the nominal current rating established using the Underwriter Laboratories test conditions, as previously stated).