AMPFORT G18 Fast Response Design Pipe Clamp Clip On Surface Temperature Sensor 10K 3950 1% NTC For Gas Boilers

Product Description

AMPFORTG 18 Fast Response Design Pipe Clamp Clip On Surface Temperature Sensor 10K 3950 1% NTC For Gas Boilers

The working principle of temperature sensor
The temperature sensor of the wall -mounted boiler is an electronic component, and its working principle is based on thermal effect. When the temperature of the furnace body changes, the thermistor material inside the temperature sensor will change the corresponding resistance change, thereby output the electrical signal to reflect the temperature change of the furnace body. These signals will return the controller by controlling the circuit. The controller controls the work of the gas valve and pump based on these signals to achieve stable control of the furnace body temperature.

A range of clip-on temperature sensors for pipe sizes from G16 G18 diameter. The sensor is held in place on the pipe by a powerful spring clip with different clip sizes making them suitable for various pipe diameters. The NTC sensing element is located in the very tip of the tiny metal housing that allows it to be closely coupled to the metal pipe. This helps to optimise the thermal response which is typically around 1 second or less. Other mounting systems are now available to help use this pipe sensor on even bigger pipes upto 100mm diameter.

Fast response design

Accuracy ±0.3°C@25°C

Waterproof housing Clip-on pipes from G16~G18

Operating range up to -20°C to +120°C

Excellent long-term stability

Gas Boilers

Heating and air conditioning systems

Instantaneous water heaters

Hot water showers

Coolant systems

Anti-legionnaires systems

1. Overview