Inverter Charges Battery Bank Temperature Sensor 47K 4100 For Quattro MultiPlus Inverter Chargers GX Devices Cerbo GX

Product Description

Inverter Charges Battery Bank Temperature Sensor 47K 4100 For Quattro MultiPlus inverter chargers GX devices Cerbo GX Venus GX

Ampfort Temperature Sensor for new Energy Quattro, MultiPlus inverter/chargers and also Compatible with GX devices (Cerbo GX, Venus GX, etc)
This is a spare part to suit a range of new Energy inverters and inverter charges that have a dedicated temperature sensing input
The new Energy temperature sensor connects directly to either pole of the battery and monitors the temperature of the battery bank
The temperature measurement is used to adjust battery capacity to temperature (which is extremely important to prolong battery life)
The available battery capacity decreases with temperature, the inverter will also vary the charge current based on temperature

Monitors water temperature | Make sure to match against the current one as different sizes are made for different machines | Fits model specific washers

It is important to disconnect your washing machine from the power and water supply before servicing.

for Quattro, MultiPlus and GX Device

The application of temperature sensor on inverter products

"The photovoltaic power generation system is mainly composed of solar batteries, batteries, controllers and inverters. The temperature sensor is essential in the photovoltaic power generation system. With it, it will automatically detect the temperature and air temperature of the solar panel. It is said that the battery temperature is detected by the external temperature sensor in the battery ultra -temperature protection controller. The overheating protection of the controller is to detect the temperature through the internal sensor to achieve automatic protection. The resistance, temperature sensor and current can detect the operation of the core and the outside world at any time. "Experts in the fields of temperature sensors such as Ishizuka, Zhipu, Daquan, Huagong High -rational and Ampfort told researchers at the Temporary Sensor Research Institute.

In summary, the main role of photovoltaic inverters is to transform the DC electricity emitted by photovoltaic components into AC power. As an electronics product, the main components are structural parts and electronic devices. The structural parts are not afraid of low temperature. Electronic devices have resistance, capacitors, inductors, relays, display screens, fans, power switch tubes, sensors, CPU chips, etc. The low temperature resistance of the device is different, and the low temperature of the inverter depends on these components.

As the core part of the photovoltaic power station system, the inverter not only has the function of DC electroconent AC power, but also feeds the information of the entire power station. The inverter requires 9 major protection. Warm protection.

Usually the working environment of photovoltaic inverters is outdoors. In the face of changes in temperature differences, humidity, storms, etc., the inverter itself is a test. It is used to measure and control its own temperature and humidity. When the temperature is too high, the inverter stops or reduces the output to protect the stable operation of the equipment. Therefore, this link is essential, so as to professional and effectively ensure the long -term stable operation of the equipment. "

"According to the power size, the number of inverters is used, usually a few points:

1. On the relay, there are many epoxy thermistor and small wires on the market. The surface of the relay is close to the surface of the relay, and there is the pile of the relay;

2. Together inductance, DC bus capacitance, AC filter capacitor, and electrical resistance should be used to use NTC temperature sensors;

3. On theIGBT substrate, use the installation of the hole -type NTC temperature sensor with a short line length.

4. In the circular temperature detection, the NTC temperature sensor should be used. "

Ampfort, who has been operating customers, has some experience. "The maximum operating temperature of Ampfort temperature sensor can reach 150 degrees. When the temperature sensor detects the temperature of the IGBT radiator exceeding the limit, the inverter disconnects the communication contactor. We can customize the resistance, length, and connectors according to the customer's requirements. "

Recommend Products

EG33121505,6323EN1001E ,6323EN1001F,6323EN1001G,PT3-51F