KSD306 KSD307 KSD308 Temperature Thermal Control Switch 95 Degrees 250V 30A 40A 45A 50A 60A Bimetal Thermostat
|Place of Origin:||DONGGUAN,GUANGDONG,CHINA|
Payment & Shipping Terms:
|Minimum Order Quantity:||1000PCS|
|Delivery Time:||2 Weeks|
|Supply Ability:||10,000,000 PIECES PER MONTH|
|Name:||Bimetal Thermostat||Series:||KSD306 KSD307 KSD308|
|Rated Current:||40A 45A 50A 60A||Voltage Rating:||100-250V|
|Temperature Tolerance:||±3, ±5 (can Be Made According To Customer Needs)||Durability:||CQC > 6000 Times|
|Normal Insulation Resistance:||>300 MΩ||Normal Contact Resistance:||≤50 MΩ|
|Use:||Overheat Protection||Application:||Water Heater|
30A Thermal Control Switch,
Bimetal Thermal Control Switch,
250V Bimetal Temperature Switch
KSD306 KSD307 KSD308 Temperature Thermal Control Switch 95degrees 250V 30A 40A 45A 50A 60A Bimetal Thermostat
Applications Of The KSD306 KSD307 KSD308 Temperature Thermal Control Switch
Suitable for electric water heaters, electric heating equipment, electric welding machines, steam heaters.
Product performance and principie Of The KSD306 KSD307 KSD308 Temperature Thermal Control Switch
KSD307 series thermostat is a double-metal contact temperature sensitive temperature relay with a fully enclosed casing. The metal sheet is bent according to the principle of thermal expansion and contraction, so as to quickly jump and turn on within a preset temperature range. The electrical appliance acts as a safety protection, and its disconnection temperature and reset temperature can be made according to the needs of the customer.
Attention Of The KSD306 KSD307 KSD308 Temperature Thermal Control Switch
● When installing by contact temperature method, the metal cover should be close to the mounting surface of the controlled appliance.
● Do not deform the cover surface during installation to avoid affecting performance.
● In order to prevent leakage, the liquid should not be allowed to penetrate into the temperature controller during use, so as not to affect the electrical reliability.
● This product is a bipolar wiring type. When used, follow the markings and connect correctly.
● The product should be stored in a warehouse with a relative humidity of less than 90% and an ambient temperature of 40 ° C below, which is ventilated, clean, dry and free of corrosive gases.
Technical parameters Of The KSD306 KSD307 KSD308 Temperature Thermal Control Switch
|Electrical characteristics:||AC250V, 50-60Hz, 45A|
|Maximum ambient temperature:||180°C|
|Operating temperature range:||40°C-150°C|
|Temperature tolerance:||±3, ±5 (can be made according to customer needs)|
|Durability:||CQC > 6000 times|
|Normal insulation resistance:||>300 MΩ|
|Normal contact resistance:||≤50 mΩ|
|Normal electrical strength:||AC1500V lasts for 1min without breakdown or flicker|
|Shell protection grade:||IP00|
|Insulation material PTI value:||PTI175|
Dimension Of The KSD306 KSD307 KSD308 Temperature Thermal Control Switch
Advantages Of The KSD306 KSD307 KSD308 Temperature Thermal Control Switch
High loading capacity
No breakdown, no flashover.
Every product will be tested, extremely high temperature pass rate.
Other Products Of The KSD306 KSD307 KSD308 Temperature Thermal Control Switch